ABOUT THE PRODUCT
ANSI/VITAV 1-1994 VME32 Backplane, 6U 5 Slot Including J1 & J2.
Benefits:
• Standard VME backplanes are available also in other slot count configurations
• Surface Mount Technology – Excellent high frequency performance, high reliability and reduced cost due to SMT
features
- Fits within standard 6U Eurocard
- SMD Technology for excellent signal integrity and improved manufacturability
- Press-fit assembly adds reliability and performance
- On-board termination without extra width
- Active/passive automatic daisy-chain or jumper pin manual daisy-chain
- 8 layer stripline controlled impedance construction
- Passive 330Ohm/470Ohm termination or Low-current active onboard termination
- High current power entry taps positioned near corresponding connector pins for minimum current paths
- Extended tails on all J2 slots and first slot J1 for I/O
- Additional user defined bus lines per custom requirements
- Optional decoupling capacitor positions
- +V and -V auxiliary (i.e. 48V) power rails
- Low noise design stripline design with outer ground planes
- 96 pin, 3 row DIN 41612 connectors J1/J2
- High frequency decoupling at each slot
- Distributed bulk low frequency decoupling
- Flexible power connections require no bus-bars
- Interleaved grounds for I/O header grounding
- Fully passive assembly (optional)
- ANSI/VITA 1-1994 compliant
