VME 32X 5 Slot 6U

技术: VME
插槽: 5

ABOUT THE PRODUCT

ANSI/VITAV 1-1994 VME32 Backplane, 6U 5 Slot Including J1 & J2.

Benefits:

• Standard VME backplanes are available also in other slot count configurations
• Surface Mount Technology – Excellent high frequency performance, high reliability and reduced cost due to SMT

features

  • Fits within standard 6U Eurocard
  • SMD Technology for excellent signal integrity and improved manufacturability
  • Press-fit assembly adds reliability and performance
  • On-board termination without extra width
  • Active/passive automatic daisy-chain or jumper pin manual daisy-chain
  • 8 layer stripline controlled impedance construction
  • Passive 330Ohm/470Ohm termination or Low-current active onboard termination
  • High current power entry taps positioned near corresponding connector pins for minimum current paths
  • Extended tails on all J2 slots and first slot J1 for I/O
  • Additional user defined bus lines per custom requirements
  • Optional decoupling capacitor positions
  • +V and -V auxiliary (i.e. 48V) power rails
  • Low noise design stripline design with outer ground planes
  • 96 pin, 3 row DIN 41612 connectors J1/J2
  • High frequency decoupling at each slot
  • Distributed bulk low frequency decoupling
  • Flexible power connections require no bus-bars
  • Interleaved grounds for I/O header grounding
  • Fully passive assembly (optional)
  • ANSI/VITA 1-1994 compliant

FIND MORE PRODUCTS