HomeBackplanesVME 32x4 Slot 6U

VME 4 Slot 6U Backplane

ANSI/VITAV 1-1994 VME32 Backplane, 6U 4 Slot Including J1 & J2

Features:

• Fits within standard 6U Eurocard
• 4 slots
• SMD Technology for excellent signal integrity and improved manufacturability
• Press-fit assembly adds reliability and performance
• On-board termination without extra width
• Active/passive automatic daisy-chain or jumper pin manual daisy-chain
• 8 layer stripline controlled impedance construction
• Passive 330Ohm/470Ohm termination or Low-current active onboard termination
• High current power entry taps positioned near corresponding connector pins for minimum current paths
• Extended tails on all J2 slots and first slot J1 for I/O
• Additional user defined bus lines per custom requirements
• Optional decoupling capacitor positions
• +V and -V auxiliary (i.e. 48V) power rails
• Low noise design stripline design with outer ground planes
• 96 pin, 3 row DIN 41612 connectors J1/J2
• High frequency decoupling at each slot
• Distributed bulk low frequency decoupling
• Flexible power connections require no bus-bars
• Interleaved grounds for I/O header grounding
• Fully passive assembly (optional)
• ANSI/VITA 1-1994 compliant

Benefits:

• Standard VME backplanes are available also in other slot count configurations
• Surface Mount Technology - Excellent high frequency performance, high reliability and reduced cost due to SMT




» more information